DONGGUAN MISUNG MOULD STEEL CO.,LTD
DongGuan Mi Sung Mould Steel Co.,ltd
Add to Cart
Din 1.2738 Hot Rolled Steel Plate For Thermo Plastics Mold
1.2738 Mould Steel
1.2738 steel is a vacuum-melting chromium-nickel-molybdenum alloy steel that has been hardened and tempered before it leaves the factory. It offers the following advantages: No risk of quench cracking and heat treatment; no need for heat treatment; shorten the cycle time; Cost (for example, without overseas Chinese is deformation); easy to amend the mold; nitriding and surface hardening can be applied to improve the mold surface hardness and wear resistance.
P20+NI steel is pre-hard mirror anti-acid plastic mould steel. The steel pre-hardened, uniform material, high cleanliness, excellent polishing performance and lithography. Also has high hardenability, good electrical processing performance and striae processing performance. Pre-hardened steel without quenching can also be used for the mold bore, flange flame hardening can be implemented, the hardness can be increased to 52HRC.
China GB standard steel No. 3Cr2NiMo;
German DIN standard material steel No. 2738;
Sweden Assab ASSAB standard steel No. 718;
US AISI / SAE standard steel P20 optimization;
Japan JS standard steel SNCM optimization;
International Organization for Standardization ISO standard steel 35CrMo2.
Round Bar: diameter 20mm – 1000mm
Steel Plate and Steel Block: thickness 12-500mm x width 200-2000mm
Surface Finish: Black Surface, Roughly Machined, Peeled & Turned or as per given requirements.
| Country | German | USA |
| Standard | DIN EN ISO 4957 | ASTM/AISI |
| Grades | 1.2738 | P20+Ni |
| DIN ISO 4957 | C | Mn | P | S | Si | Cr | W | Mo | Ni | |||||||
| 1.2738 | 0.35 | 0.45 | 1.30 | 1.60 | 0.03 | 0.03 | 0.20 | 0.40 | 1.80 | 2.10 | 0.15 | 0.25 | 0.90 | 1.20 | ||
| ASTM / AISI | C | Mn | P | S | Si | Cr | W | T | Mo | |||||||
| P20+Ni | 0.28 | 0.40 | 0.60 | 1.00 | 0.03 | 0.03 | 0.20 | 0.80 | 1.40 | 2.00 | 0.30 | 0.55 | 0.90 | 1.20 | ||
